• Deutsch
  • English
  • Deutsch
  • English
    • +49 (0) 2402 766810 info@dyna-mess.de

    DYNA-FTT + DYNA-SST

    DYNA-FTT + DYNA-SST
    Technical properties

    DYNA-FTT: FastTension Tester
    DYNA-SST: StaticStrength Tester

    The FastTension Tester DYNA-FTT and the StaticStrength Tester DYNA-SST are testing devices for testing the recliners of car seats. The FastTension Tester can be used to perform fast tension tests and the StaticStrength Tester can be used to perform strength tests.

    We are DYNA-MESS. Test Systems.

    Technical properties

    DYNA-FTT

    • Speed 1 m/s
    • Supplementary to crash tests

    DYNA-SST

    • Determination of the static strength of recliners
    • Speed 50 mm/s
    • Integrated electronics and PC
    • Integrated hydraulic unit
    • Adjustable axle height between 0 and 750 mm
    • Test axis swivelling up to 45
    • Movable base plate (+/- 250mm)
    • Adjustable angle of the base plate (0-45°)
    • Protective housing
    Data sheet

    Always included: state-of-the-art software and electronics

    Software DYNA-TCC
    Electronics DYNA-CLC

    DYNAchew

    DYNAchew
    Technical properties

    DYNAchew: Chewing simulation on dental implants


    DYNA-MESS has developed the DYNAchew chewing simulator for chewing simulation on dental implants.

    We are DYNA-MESS. Test Systems.

    Technical properties

    DYNAchew consists of three electrically driven linear axes to accurately simulate the chewing movement. Two are responsible for the X-Y movement and the third for the vertical movement in the Z direction.

    Validation and comparability of the test method

    By defining a standard geometry for the test specimen, it is possible to compare different abutments.

    This geometry enables not only force-locking movement in the cone but also a point load on the ring surface via peak force control.

    Data sheet

    Special software for user-friendly parameterisation

    The adaptations to our DYNA-TCC software offer a simple way of setting the path of the XY table via the phase offset. It is also visualised where the vertical Z-axis applies the highest force to the test specimen.

    Temperature control

    Peltier elements installed in the sample stage ensure the cyclical temperature change. The temperature control is parameterised via the software and then runs automatically with the test.

    This allows realistic temperatures to be simulated by cold or hot food and the implants to be tested accordingly.

    Always included: state-of-the-art software and electronics

    Software DYNA-TCC
    Electronics DYNA-CLC

    DYNA-FaSi

    DYNA-FaSi
    Technical properties

    DYNA-FaSi: Driving simulation seats

    Driving simulation test rig for testing vehicle seats in fatigue and endurance tests as well as static tests.

    We are DYNA-MESS. Test Systems.

    Technical properties

    • Four variably positionable acutators on the load frame
    • One each for the x and z directions and two for the y direction
    • High flexibility thanks to various operating modes and combinability of actuators
    Data sheet

    Fatigue test

    Endurance tests on vehicle seats are carried out using classic vibration tests, multi-stage/block tests or cyclic ramp tests. Both the metallic seat structures and fully upholstered seats are analysed. The force is applied via back and buttock dummies in order to reproduce a load that is as close to reality as possible.

    Tensile and compressive loads

    Many test specifications stipulate alternating loads in two directions. Thanks to the servo technology used, these loads can be applied with just one test axis. The axis-integrated force and displacement measurement ensures that the desired loads and positions are approached precisely.

    Always included: state-of-the-art software and electronics

    Software DYNA-TCC
    Electronics DYNA-CLC

    DYNA-BAT

    DYNA-BAT
    Technical properties

    DYNA-BAT: Bi-axial tester

    The DYNA-BAT steering wheel bi-axial tester is a test rig for car steering wheels. It offers the possibility of applying single-axis and multi-axes loads to a test specimen for fatigue testing.

    We are DYNA-MESS. Test Systems.

    Technical properties

    Combined mode

    • Combination of up to four control loops with superimposed phase control
    • Automatic break detection
    • Continuous real-time data recording during the test
    • Report with trend diagram “Load/displacement vs. cycles”
    • Determination of the permanent deformation

    Single mode

    • Testing of a maximum of four steering wheels
    • Independent use of the actuator for individual operation
    • Automatic break detection for each actuator
    • Continuous real-time data recording during the test for each actuator
    • Report with trend diagram “Load/displacement vs. cycles” for each actuator
    • Determination of the permanent deformation
    Data sheet

    Always included: state-of-the-art software and electronics

    Software DYNA-TCC
    Electronics DYNA-CLC

    DYNA-EVP

    DYNA-EVP
    Technical properties

    DYNA-EVP: Ehra Validation Procedure

    DYNA-MESS Ehra tester for operating load tests on car seats.

    We are DYNA-MESS. Test Systems.

    Technical properties

    Testing machine for tests according to:

    • EP 84.300.41
    • EP 84.330.21
    • EP 84.332.40
    • EP 84.340.11
    • EP 84.360.40
    • Portal frame with 3 load units (3 front seats or one rear seat)
    • Vibrating plate for vertical movement, with additional horizontal movement
    • Tracking tests (Ehra signal)
    Data sheet

    Software module for tracking tests

    • Setting the curve using an ASCII file
    • Continuous reading and processing by software
    • Set curve can be used for load or displacement control
    • Scaling of the signal through software

    Always included: state-of-the-art software and electronics

    Software DYNA-TCC
    Electronics DYNA-CLC

    DYNA-HAT + DYNA-BDT

    DYNA-HAT + DYNA-BDT
    Technical properties

    DYNA-HAT: Horn Action Tester
    DYNA-BDT: Button Durability Tester

    DYNA-HAT and DYNA-BDT are the ideal products for testing the horn push force and service life of switches on steering wheels.

    We are DYNA-MESS. Test Systems.

    Technical properties

    DYNA-HAT: Horn Action Tester

    • Actuating the horn
    • Measurement of compressive force and displacement
    • Determining the switching point (on/off)
    • Adjustable electronic load
    • Continuous visualisation of the values

    DYNA-BDT: Button Durability Tester

    • Operating the switches
    • Independent operation of up to 6 stations
    • Adjustable electronic load
    • Visualisation of force and switch feedback (voltage, current)

    Always included: state-of-the-art software and electronics

    Software DYNA-TCC
    Electronics DYNA-CLC

    DYNA-BPS

    DYNA-BPS
    Technical properties

    DYNA-BPS: Brake Pedal System

    The DYNA-BPS torsion testing machine is used for dynamic component testing on electric brake pedals.

    We are DYNA-MESS. Test Systems.

    Technical properties

    • Function test on electric brake pedals
    • Endurance test on electric brake pedals
    • Testing under climatic conditions
      • Temperature range -40°C to 180 °C
      • Temperature change rate 7 K/min
      • Humidity range 10-98 % r.h.

    Always included: state-of-the-art software and electronics

    Software DYNA-TCC
    Electronics DYNA-CLC

    DYNA-AFT

    DYNA-AFT
    Technical properties

    DYNA-AFT: Automated Foam Tester

    DYNA-MESS has developed the DYNA-AFT (Automated Foam Tester) testing machine for foam testing in accordance with ISO 2439, ISO 3386 and ISO 3385.

    We are DYNA-MESS. Test Systems.

    DYNA-AFT testing machine for foam

    Technical properties

    DYNA-MESS foam testing

    Foam testing according to standard

    Testing machine for tests according to

    • ISO 2439
    • ISO 3385
    • ISO 3386
    DYNA-MESS DYNA-AFT testing machine for foam
    • Small footprint
    • Test specimen preparation next to test position possible
    • Test at two stations: automatic retraction of the test specimen when the previous test has been completed

    Always included: state-of-the-art software and electronics

    Software DYNA-TCC
    Electronics DYNA-CLC

    DYNA-AST

    DYNA-AST
    Description

    DYNA-AST: Arc Spring Tester

    DYNA-MESS has developed the DYNA-AST (Arc Spring Tester) testing machine for the simultaneous testing of several arc springs.

    We are DYNA-MESS. Test Systems.

    Description

    • Simultaneous testing of up to 4 springs
    • Torque measurement: Precision measurement for dynamic testing
    • Contactless angle measurement
    • Temperature measurement

    Software module “Fatigue testing on arc springs”

    • Dynamic loading of the springs on block
    • Dynamic tests in angle or torque control

    Always included: state-of-the-art software and electronics

    Software DYNA-TCC
    Electronics DYNA-CLC

    DYNAdent

    DYNAdent
    Technical properties

    DYNAdent:
    Testing machine for fatigue tests on endosseous dental implants


    DYNA-MESS offers perfectly customised machines for testing dental implants in accordance with ISO 14801.

    We are DYNA-MESS. Test Systems.

    Technical properties

    The DYNA1dent and DYNA5dent machines offer a number of advantages over the universal testing machines normally used, which are slightly modified to meet the special requirements of dental testing:

    • Optimised adjustment to fatigue tests according to ISO 14801
    • Purely electric drive, which means: no hydraulics, pneumatics or compressed air required
    • Integrated force measurement, protected underneath the top cover
    • Displacement measurement also protected underneath the top cover
    • Little space required for installation
    • Practical visual display of the operating status (set-up, testing, end of test)
    • Test basin with practical connections for circulation and preparation of the test medium
    • Shear force-free force transmission through sliding joint
    • Sophisticated test software including user administration, sample library, very simple test parameterisation, online graphics, data recording during the entire duration of the test, test protocol
    • Embedding device for straight and/or angled implants

    Other tests can also be carried out by simply changing the test device:

    • 3- or 4-point bending tests on e.g. ceramic rods
    • Bending tests on bridge structures
    • Print tests
    • …
    Data sheet

    DYNAdent in two versions

    DYNA1dent: Single testing machine

    DYNA5dent: 5-station testing machine

    Operation

    DYNAdent is supplied with an all-in-one PC that can be operated both via a keyboard and via the touchscreen monitor.

    Tempering unit

    An appropriate additional device can be installed for temperature control and circulation of physiological saline solution.

    Always included: state-of-the-art software and electronics

    Software DYNA-TCC
    Electronics DYNA-CLC