• Deutsch
  • English
  • Deutsch
  • English
    • +49 (0) 2402 766810 info@dyna-mess.de

    DYNA-FTT + DYNA-SST

    DYNA-FTT + DYNA-SST
    Technical properties

    DYNA-FTT: FastTension Tester
    DYNA-SST: StaticStrength Tester

    The FastTension Tester DYNA-FTT and the StaticStrength Tester DYNA-SST are testing devices for testing the recliners of car seats. The FastTension Tester can be used to perform fast tension tests and the StaticStrength Tester can be used to perform strength tests.

    We are DYNA-MESS. Test Systems.

    Technical properties

    DYNA-FTT

    • Speed 1 m/s
    • Supplementary to crash tests

    DYNA-SST

    • Determination of the static strength of recliners
    • Speed 50 mm/s
    • Integrated electronics and PC
    • Integrated hydraulic unit
    • Adjustable axle height between 0 and 750 mm
    • Test axis swivelling up to 45
    • Movable base plate (+/- 250mm)
    • Adjustable angle of the base plate (0-45°)
    • Protective housing
    Data sheet

    Always included: state-of-the-art software and electronics

    Software DYNA-TCC
    Electronics DYNA-CLC

    DYNA-FaSi

    DYNA-FaSi
    Technical properties

    DYNA-FaSi: Driving simulation seats

    Driving simulation test rig for testing vehicle seats in fatigue and endurance tests as well as static tests.

    We are DYNA-MESS. Test Systems.

    Technical properties

    • Four variably positionable acutators on the load frame
    • One each for the x and z directions and two for the y direction
    • High flexibility thanks to various operating modes and combinability of actuators
    Data sheet

    Fatigue test

    Endurance tests on vehicle seats are carried out using classic vibration tests, multi-stage/block tests or cyclic ramp tests. Both the metallic seat structures and fully upholstered seats are analysed. The force is applied via back and buttock dummies in order to reproduce a load that is as close to reality as possible.

    Tensile and compressive loads

    Many test specifications stipulate alternating loads in two directions. Thanks to the servo technology used, these loads can be applied with just one test axis. The axis-integrated force and displacement measurement ensures that the desired loads and positions are approached precisely.

    Always included: state-of-the-art software and electronics

    Software DYNA-TCC
    Electronics DYNA-CLC

    DYNA-BAT

    DYNA-BAT
    Technical properties

    DYNA-BAT: Bi-axial tester

    The DYNA-BAT steering wheel bi-axial tester is a test rig for car steering wheels. It offers the possibility of applying single-axis and multi-axes loads to a test specimen for fatigue testing.

    We are DYNA-MESS. Test Systems.

    Technical properties

    Combined mode

    • Combination of up to four control loops with superimposed phase control
    • Automatic break detection
    • Continuous real-time data recording during the test
    • Report with trend diagram “Load/displacement vs. cycles”
    • Determination of the permanent deformation

    Single mode

    • Testing of a maximum of four steering wheels
    • Independent use of the actuator for individual operation
    • Automatic break detection for each actuator
    • Continuous real-time data recording during the test for each actuator
    • Report with trend diagram “Load/displacement vs. cycles” for each actuator
    • Determination of the permanent deformation
    Data sheet

    Always included: state-of-the-art software and electronics

    Software DYNA-TCC
    Electronics DYNA-CLC

    DYNA-EVP

    DYNA-EVP
    Technical properties

    DYNA-EVP: Ehra Validation Procedure

    DYNA-MESS Ehra tester for operating load tests on car seats.

    We are DYNA-MESS. Test Systems.

    Technical properties

    Testing machine for tests according to:

    • EP 84.300.41
    • EP 84.330.21
    • EP 84.332.40
    • EP 84.340.11
    • EP 84.360.40
    • Portal frame with 3 load units (3 front seats or one rear seat)
    • Vibrating plate for vertical movement, with additional horizontal movement
    • Tracking tests (Ehra signal)
    Data sheet

    Software module for tracking tests

    • Setting the curve using an ASCII file
    • Continuous reading and processing by software
    • Set curve can be used for load or displacement control
    • Scaling of the signal through software

    Always included: state-of-the-art software and electronics

    Software DYNA-TCC
    Electronics DYNA-CLC

    DYNA-HAT + DYNA-BDT

    DYNA-HAT + DYNA-BDT
    Technical properties

    DYNA-HAT: Horn Action Tester
    DYNA-BDT: Button Durability Tester

    DYNA-HAT and DYNA-BDT are the ideal products for testing the horn push force and service life of switches on steering wheels.

    We are DYNA-MESS. Test Systems.

    Technical properties

    DYNA-HAT: Horn Action Tester

    • Actuating the horn
    • Measurement of compressive force and displacement
    • Determining the switching point (on/off)
    • Adjustable electronic load
    • Continuous visualisation of the values

    DYNA-BDT: Button Durability Tester

    • Operating the switches
    • Independent operation of up to 6 stations
    • Adjustable electronic load
    • Visualisation of force and switch feedback (voltage, current)

    Always included: state-of-the-art software and electronics

    Software DYNA-TCC
    Electronics DYNA-CLC

    DYNA-BPS

    DYNA-BPS
    Technical properties

    DYNA-BPS: Brake Pedal System

    The DYNA-BPS torsion testing machine is used for dynamic component testing on electric brake pedals.

    We are DYNA-MESS. Test Systems.

    Technical properties

    • Function test on electric brake pedals
    • Endurance test on electric brake pedals
    • Testing under climatic conditions
      • Temperature range -40°C to 180 °C
      • Temperature change rate 7 K/min
      • Humidity range 10-98 % r.h.

    Always included: state-of-the-art software and electronics

    Software DYNA-TCC
    Electronics DYNA-CLC

    DYNA-AFT

    DYNA-AFT
    Technical properties

    DYNA-AFT: Automated Foam Tester

    DYNA-MESS has developed the DYNA-AFT (Automated Foam Tester) testing machine for foam testing in accordance with ISO 2439, ISO 3386 and ISO 3385.

    We are DYNA-MESS. Test Systems.

    DYNA-AFT testing machine for foam

    Technical properties

    DYNA-MESS foam testing

    Foam testing according to standard

    Testing machine for tests according to

    • ISO 2439
    • ISO 3385
    • ISO 3386
    DYNA-MESS DYNA-AFT testing machine for foam
    • Small footprint
    • Test specimen preparation next to test position possible
    • Test at two stations: automatic retraction of the test specimen when the previous test has been completed

    Always included: state-of-the-art software and electronics

    Software DYNA-TCC
    Electronics DYNA-CLC

    Play and stiffness test rig

    Play and stiffness test rig
    Technical properties

    Play and stiffness test rig

    DYNA-MESS test stand for measuring the play and stiffness of seats.

    We are DYNA-MESS. Test Systems.

    DYNA-MESS test stand for measuring the play and stiffness of seats

    Technical properties

    DYNA-MESS test portal for measuring play and stiffness
    • Very rigid portal frame as a welded construction
    • Base plate with T-slots or hole pattern
    • Electrical traverse of the gantry in x, y and z direction
    • Servo-electric or servo-pneumatic drive
    • Rotating and swivelling actuator, gimbal-mounted
    • Additional displacement transducers
    • Special software for calculating play and stiffness values

    Always included: state-of-the-art software and electronics

    Software DYNA-TCC
    Electronics DYNA-CLC

    Torsion testing machines

    Torsion testing machines
    Technical properties

    Torsion testing machines

    Various components, including vehicle couplings, elastomer couplings, dual-mass flywheels, drive shafts and transmission components, are subjected to torsional loads during operation. These components can be tested on DYNA-MESS torsion test rigs.

    We are DYNA-MESS. Test Systems.

    DYNA-MESS circumferential torsion testing machine

    Technical properties

    DYNA-MESS torsion testing machine 14 kNm

    Static characteristic curves and dynamic characteristic values

    DYNA-MESS torsion test rigs enable both static load tests up to breakage and dynamic fatigue tests to determine service life. Vibrations can be superimposed on static moments in order to simulate operating conditions. The test benches are also used to determine characteristic values, including the static torsion curve, hysteresis, stiffness at various operating points, dynamic stiffness, loss angle and damping energy.

    DYNA-MESS torsion testing machine

    Axial preloads, torsion test rigs and superposition test rigs

    Complex test systems for development can be equipped with several superimposed drives if required by the application of the component to be tested. For example, systems with selectable, constant drive speed, to which a vibration load and additional slip between the input and output side is superimposed, have been realised. Classic torsion test benches or torsion test benches with superimposed axial loading are also possible.

    Always included: state-of-the-art software and electronics

    Software DYNA-TCC
    Electronics DYNA-CLC

    DYNA-ElastoTest

    DYNA-ElastoTest
    Technical properties

    DYNA-ElastoTest

    Compact end-of-line test station for the production-related assessment of static and dynamic characteristic values of rubber/metal elements. The DYNA-ElastoTest is a plug and play-capable test station with integrated controller.

    We are DYNA-MESS. Test Systems.

    DYNA-MESS DYNA-ElastoTest End-of-Line testing system

    Technical properties

    DYNA-MESS DYNA-ElastoTest End-of-Line testing system for electrics and electronics

    Automatic mode

    • Provision of standard interface signals to the higher-level control system
    • Automatic test specimen detection
    • Automatic sample selection
    • Automatic test start
    • Automatic data storage
    • Shift and article file

    “Elastomer test” software module

    • Test specimen conditioning
    • Static tests
    • dynamic tests
    • Sweep tests/characterisation
    • Graphical representation of signal curves and hysteresis curves
    • Automatic determination of component parameters (static stiffness, dynamic stiffness, loss angle, work loss, damping and others according to different evaluation methods)
    • Online display of the component characteristics and the iO/niO evaluation

    Software module “Sweep test”

    • Component characterisation using different evaluation methods
    • Sweep tests in force/displacement control
    • Display of dynamic characteristic values over frequency
    DYNA-MESS ElastoTest End-of-Line test system Test lamp Drop shaft
    DYNA-MESS DYNA-ElastoTest End-of-Line test system with label printer and scanner

    Options

    • Vacuum test
    • Temperature-dependent OK/nOK evaluation
    • DMC printer
    • DMC scanner
    • Laser labelling
    • Needle embosser
    • Further customised solutions can be implemented

    Always included: state-of-the-art software and electronics

    Software DYNA-TCC
    Electronics DYNA-CLC